Fabric Quality Control & Inspection FAQs

01. What Quality Checks Are Required Before Bulk Fabric Shipment?

At Naying Textile, our production team monitors quality throughout manufacturing. Finished fabrics are transferred to our own warehouse for full inspection before shipment.

Inspection focuses on fabric appearance, color, pattern consistency, width, visible defects, and other agreed quality requirements. Different fabric types have specific inspection priorities.

02. How Can Buyers Ensure Bulk Fabric Matches the Approved Sample?

Buyers should confirm the fabric specifications, color, pattern, hand feel, width, and quality requirements before bulk production.

Naying Textile uses approved samples and confirmed specifications as production references. Our production team follows the manufacturing process, while finished fabrics undergo full inspection at our warehouse.

03. What Are Common Quality Defects in Embroidered Fabrics?

Common defects include missing or broken stitches, uneven embroidery density, pattern misalignment, fabric puckering, stains, and embroidery thread problems.

For sequin embroidery, loose or missing sequins and variations in usable width may also occur. Quality checks should consider the embroidery technique, base fabric, and agreed product requirements.

04. How Are Fabric Defects Identified and Classified?

Fabric defects are identified through visual inspection and measurements against agreed quality requirements.

Defects may be classified by their type, severity, size, and impact on garment production. Inspection methods and acceptance criteria should be confirmed according to the fabric type and customer requirements.

05. What Is the Difference Between Full Width and Cuttable Width?

Full Width is the total width of the fabric, including edges or selvedges.

Cuttable Width is the usable width available for garment cutting after excluding unusable edges or other restricted areas.

For embroidered, sequin, and lace fabrics, the difference can affect fabric consumption and garment production costs.

06. How Much Fabric Width Variation Is Acceptable?

Acceptable width variation depends on the fabric construction, elasticity, embroidery technique, and agreed specifications.

Stretch fabrics, especially certain sequin-embroidered fabrics, may show width changes due to embroidery thread tension and fabric structure.

Buyers should confirm the required cuttable width and acceptable tolerance before bulk production.

07. What Should Buyers Do If Bulk Fabric Fails Inspection?

Buyers should document the defects, affected quantities, inspection results, and supporting photos, then contact the supplier promptly.

Naying Textile’s production and technical teams analyze quality problems and evaluate appropriate solutions, such as correction, reprocessing, replacement, or other agreed arrangements, depending on the issue.

08. Can Buyers Arrange Third-Party Inspection Before Shipment?

Yes. Buyers can arrange independent third-party inspection before shipment, subject to advance coordination.

Inspection standards, sampling methods, acceptance criteria, and inspection schedules should be agreed upon in advance.

Naying Textile also conducts full inspection of finished fabrics at our own warehouse.

Scroll to Top